Support > Repository > Environment > Email
ja | en

We will make detailed settings for the mail server used by Wagby.

Wagby itself does not have a mail server function.We will use the mail server already used within your company. Please set the following settings according to the mail server (under operation).

Select "Mail" from the "Environment" menu.

Figure 1 Mail settings

Mail host name

The mail host specified here can be used commonly throughout the project.

If the mail host of each mail transmission setting is blank, the mail host specified here will be used.

port number

Specify the number of the mail transmission port (SMTP).By default, the standard port number of the selected protocol is used.25 for SMTP and 465 for SMTP over SSL.

protocol

Select SMTP or SMTP over SSL.

SMTP authentication

If SMTP authentication function is required, enable this setting.
SMTP authentication supports "LOGIN" and "PLAIN" methods.(It does not correspond to "CRAM - MD 5", "DIGEST - MD 5", "NTLM" etc).)

account name

When SMTP authentication is enabled, specify the account name for authentication.

password

When SMTP authentication is enabled, specify the password for the account for authentication at the same time.

Connection timeout

Specify the connection timeout time for communication with the mail server.The unit is millisecond.The standard value is 60,000 ms (60 seconds).When it is omitted, it becomes unlimited (timeout none).

time out

Specify the I/O timeout time for communication with the mail server.The unit is millisecond.The standard value is 60,000 ms (60 seconds).When it is omitted, it becomes unlimited (timeout none).