Support > Repository > Input control > Control of display position of input field
ja | en

You can select the horizontal position of the entry field from the left, center, right alignment. You can select the vertical position from up, center, and bottom. You can select the position from the left or right justified.

Screen example

Figure 1 shows an example where the position next to the input field is centered.

Figure 1 Example of specifying the display position beside the input field as the center

Definition method

"Input control> Style> Horizontal display position of input area" of model item detail definition.You can choose from "Left justification", "Centering", "Right justification".When it is blank, it becomes "left justified".

Fig. 2 Display position of input area (horizontal)

Screen example

Figure 3 shows an example in which the vertical position of the input field is centered (centering).

Figure 3 Example in which the vertical display position of the input field is specified as the center

Definition method

Here, to make it easy for visual clarity, the height of the input field is set to 100 pixels.

Specify "Input control> Style> Display position vertical position of input area" of model item detail definition.You can choose from "Upward", "Centering", "Downward".When it is blank, it becomes "centering".

Figure 4 Input area display position (vertical)

Screen example

Figure 5 shows an example where the cursor position in the input field is right-aligned.

Figure 5 Example where the cursor position in the input field is right-aligned

Definition method

Specify "input control> style> cursor position in input area" of model item detail definition.You can choose from "left justified" or "right aligned".When it is blank, it becomes "left justified".

Figure 6 Example of specifying the cursor position in the input area to the right

The repository key at the display position (horizontal) of the input area is presentation/displayitem/@alignForEdit.

The repository key of the display position (vertical) of the input area is presentation/displayitem/@valignForEdit.

The repository key for the cursor position in the input area is presentation/displayitem/@cursorPosition.